Filter
Top Products
Adjusting the oven temperature control
Oven temperature
controls will gradually
shift after years of use. So, even though
your new oven is properly adjusted to
provide accurate temperatures, it may cook
faster or slower than your old oven.
If, after using the oven for a period of time,
you are not satisfied with the temperature
settings, you can adjust them by following
these steps:
1. Make sure the Oven Temperature
Control Knob is turned to the off position.
Pull knob straight off and flip it over.
2. Loosen the locking screws inside the
control knob. Note the position of the
notches.
3. To lower the temperature, hold knob
handle firmly and move the tooth a notch
clockwise. Each notch equals about
20°F (11°C).
4. To raise the temperature, hold knob
handle firmly and move the tooth a notch
counterclockwise. Each notch equals
about 20°F (11 “C).
5. Tighten the locking screws and replace
the control knob.
Locking
screws
Not&s
iooth
Broiling
1. Position the rack properly before turning
’ on the oven. Position the oven rack so
that the surface of the food is at least
3 inches (7 cm) away from the broil
burner. See “Broiling rack position chart”
on page 15.
2. Preheat the broiler for 5 minutes before
using.
3. Put the broiler pan and food on the rack.
4. Completely close the oven door to
’ ensure proper broiling temperatures.
13