Roper FGS395B Range User Manual


 
Until you get used to the settings, use
the following as a guide. For best results,
start cooking at the high setting; then turn
the control knob down to continue cooking.
r
r
SETTING RECOMMENDED USE
LITE l To light the burner. After
the burner lights, turn
control back to a desired
setting to stop the clicking
of the ignitor.
HI l To start foods cooking.
l To bring liquids to a boil.
MED l To hold a rapid boil.
l To fry chicken or pancakes.
l For gravy, pudding and
icing.
l To cook large amounts of
vegetables.
LOW
l To keep food warm until
ready to serve.
NOTE: Do not cook with the control in the
LITE position.
In case of a prolonged power
failure
Surface burners can be manually lighted.
Hold a lit match near a burner and turn the
control knob to the LITE position. After the
burner lights, turn the control knob to the
desired setting.
Burn, Fire and Explosion Hazard
l Burner flame should not extend beyond
the edge of the cooking utensil. The
flame could burn you and cause poor
cooking results.
l Be sure all control knobs are turned to
OFF when you are not cooking.
Someone could be burned or a fire
could start if a burner is accidentally
left ON.
l If the flame should go out while cook-
ing, or if there is a strong gas odor, turn
the burners OFF. Wait five minutes for
the gas odor to disappear before
relighting burner. If gas odor is still
present, see safety note on page 3.
Failure to follow these precautions
could result in explosion or fire.
Product Damage Hazard
Do not leave an empty utensil, or one
which has boiled dry, on a hot surface
burner.
The utensil could overheat and could
damage the utensil or cooking product.
Cookware tips
No one brand of cookware is best for all
people. Knowing something about pan
materials and construction will help you
select the correct cookware for your needs.
l NOTE: For best results and greater fuel
efficiency, use only flat-bottomed cook-
ware in good condition.
l The pan should have straight sides and a
tight-fitting lid.
l Choose medium to heavy gauge (thick-
ness) pans that are fairly lightweight.
l The pan material (metal or glass) affects
how fast heat transfers from the surface
burner through the pan material and how
evenly heat spreads over the pan bottom.
Choose pans that provide the best cooking
results.