Roper FGS395B Range User Manual


 
The oven light
Model FGS385B: The oven light will come
on when you open the oven door.
Model FGS395B: To turn on the light, press
the Oven Light Switch on the top left corner
of the backguard.
Electrical Shock and
Personal Injury Hazard
l Make sure oven and light bulb are
cool and power to the range has been
turned off before replacing the light
bulb. Failure to do so could result in
electrical shock or burns.
.The bulb cover must be in place when
using the oven. The cover protects
the bulb from breaking, and from high
oven temperatures. Because bulb
cover is made of glass, be careful not
to drop it. Broken glass could cause
injury.
To replace the oven light:
1. Unplug appliance or disconnect at the
main power supply.
2. Remove the glass bulb cover in the back
of the oven by pushing the wire holder to
the side and pulling out bulb cover.
3. Remove the light bulb from its socket.
Replace the bulb with a 40-watt appli-
ance bulb.
4.
Replace the bulb cover and snap the
wire holder into place. Plug in appliance
or reconnect at the main power supply.
NOTE: The oven light should not be used
during the Self-Cleaning cycle. Use during
the Self-Cleaning cycle will shorten the life of
the bulb.
27