Filter
Top Products
Removing the freezer shelf
The freezer shelf is removable for easy cleaning, or
to create more open space in the freezer compart-
ment for storage of large or bulk items.
To remove the shelf, lift the shelf off of the sup-
__ orts and slide out of
the shelf support holes.
Replace in the reverse
_li order.
Removing the ice maker storage bin
3. Lift up the front of the storage bin and pull it out.There are several reasons why you may need to re-
move, empty, and clean the ice maker storage bin.
• The ice dispenser has not, or will not, be used for
a week or more.
• A power failure causes the ice in the bin to melt
and freeze together.
• The ice dispenser is not used regularly.
• Ice tastes off-flavored. (See Troubleshooting guide
on page 33.)
If any of these conditions apply to you, follow the
instructions on removing the ice bin.
To remove the ice bin:
1. Pull the covering panel out from the bottom and
then slide it back
toward the rear.
4. Empty the ice bin. Use warm water to melt the ice
if necessary. Never use anything sharp to break
up the ice in the bin. This can cause damage to the
bin and the dispenser mechanism.
5. Wash with a mild detergent and rinse well. Do
not use harsh or abrasive cleaners or solvents.
When you replace the bin, make sure it is pushed
in all the way or the dispenser will not work. Then
push the signal arm down to the ON position to
restart ice production. Make sure the door is
closed tightly.
2. Lift the signal arm so it clicks into the OFF (up)
i position. Ice can still be
dispensed, but no more
can be made.
18