Filter
Top Products
Using the automatic ice maker
Before you turn the ice maker on, be sure that it is
attached to a water supply. Instructions for the ice
maker water supply hookup are on pages 5-7 of
this manual.
• The ON/OFF lever is a wire signal arm. Push the
arm down to start making ice automatically, and
push it up to shut off the ice maker.
• It is normal for the ice to be attached at the
corners. It will break apart easily.
• The ice maker will not operate until the freezer is
cold enough to make ice. This can take as long
as 24 hours.
REMEMBER:
• The quality of your ice will be only as good as the
quality of the water supply that the ice maker is
hooked up to.
• Avoid connecting the ice maker to a softened
water supply. Water softener chemicals (such as
salt) can damage the ice maker mold and lead to
poor quality ice. If a softened water supply
cannot be avoided, make sure the water softener
is operating properly and is well maintained.
Signal arm
Ejector arm
Off
On
10