Filter
Top Products
Changing the light bulbs (cont.)
Light below the ice bin
1. Push in the sides of the light shield and pull
down until the shield snaps free,
2. Replace the bulb with a 40-watt appliance bulb.
3. Replace the light shield.
I
I
I
I
I
Lower
freezer
light
Upper freezer light
(on some models)
1. Remove the light shield by grasping the top
center of the shield and pulling forward while
turning it slightly to one side.
2. Replace the bulb with a 40-watt appliance bulb.
3. To replace the light shield:
• Grasp the top center of the shield and insert
the tabs on one end into the slotted holes in
the freezer liner.
• Carefully bend the shield at the center to insert
the tabs on the other end.
Upper freezer light
Dispenser area light
1. Reach through the dispenser area to remove
the bulb.
2. Replace the bulb with a heavy-duty lO-watt
bulb, which can be purchased from your
Kenmore dealer.
\
__enser
light
20