Filter
Top Products
Removing the base grille
You will need to remove the base grille to clean the
defrost pan or the condenser coils (see above), or
to level the refrigerator.
To remove the base grille:
1. Open both doors.
2. Place hands along the ends of the grille, with
your thumbs along the top. Push in with your
thumbs and pull up on the bottom.
NOTE: Be sure to replace the Tech Sheet that is
fastened behind the grille if it has been removed
for cleaning.
To replace the grille:
1. Line up the grille support tabs with the metal clips.
2. Push the grille firmly to snap it into place and close
the doors.
Metal clips
Condenser coils
Defrost
pan
Support tabs
Base
grille
Removing Doors
Electrical Shock Hazard
Unplug the refrigerator from electrical
supply before removing doors.
Failure to do so can result in death or
electrical shock.
i
NOTE: Before removing doors, open both doors
and remove base grille (see above).
TOOLS NEEDED:
Phillips screwdriver, 1/4"hex-head socket wrench,
%6" hex-head socket wrench.
1, If you have a dispenser (ice or water), discon-
nect water line.
• Remove hose from clip (A).
• Disconnect union nut (B) and slide it back
onto tube.
• Remove metal insert (C) from tube.
• Remove union nut (B) and spring (D).
2 j
23