Sub-Zero DO30-2F/S-TH NA Oven User Manual


 
wolfappliance.com
|
89
WOLF COOKTOP VENTILATION
RANGES / RANGETOPSOVENS / WARMING DRAWERS OUTDOOR GRILLS VENTILATIONCOOKTOPS
Planning Information
Wolf downdrafts can be installed with most Wolf cooktops,
but are not compatible with contemporary induction and
electric cooktops and the grill, steamer and fryer modules.
Downdrafts can be installed with sealed burner rangetop
models SRT304 and SRT366. An accessory trim kit is
necessary for this installation. Contact an authorized Wolf
dealer for details.
The remote-mounted control module must be located within
9'
(2.7 m) of the downdraft assembly and a minimum 3" (76)
from the edge of the cooktop cut-out.
Internal, in-line and remote blowers are available through an
authorized Wolf dealer. For local dealer information, visit the
nd a showroom section of our website, wolfappliance.com.
Internal blowers include a 6"
(152) round discharge and can
be front or rear mounted. It can be discharged in any direc-
tion by rotating the blower box. In-line and remote blowers
include a 10"
(254) discharge and can be discharged from
the front or rear.
Consult a qualied HVAC professional for specic installa-
tion and ducting applications.
ELECTRICAL
Installation must comply with all applicable electrical codes.
Locate the electrical supply as shown in the illustrations
on the following pages. A separate circuit, servicing only
this appliance is required. A ground fault circuit interrupter
(GFCI) is not recommended and may cause interruption of
operation.
Certain installations may require that the electrical supply
be placed in an adjacent cabinet.
ELECTRICAL REQUIREMENTS
Electrical Supply grounded, 120 VAC, 60 Hz
Service 15 amp dedicated circuit
Receptacle 3-prong grounding-type
Power Cord 2
1
/2' (.8 m)