Taylor 161 Freezer User Manual


 
9
Model 161 Important: To the Operator
If the beater motor is turningproperly, press theWASH
key to cancel the cycle. Press the AUTO key on both
sides of the unit to resume normal operation. If the
freezer shuts down again, contact a service
technician.
Air Tube
The air tubeserves two purposes. One end of th e tube
has an orifice (hole) and the other end does not.
Figure 1
1. Afte r priming the machine, place the or ifice end
of the air tube into the mix inlet hole. Every time
the draw handle is raised, new mix and air from
the hopper will flow down into the freezing
cylinder. This will keep the freezing cy linder
properly loaded and will m aintain ov errun.
2. During long “No Sale” periods, remove the air
tube. Replace the air tube with the (end without
hole), into the mix inlet hole. This will prevent
any mix from entering the freezing cylinder.
The air tube maintains overrun and allows
enough mix to enter the freezing cylinder after a
draw.