Taylor 161 Freezer User Manual


 
2
Model 161To the Operator
050818
Section 2 To the Operator
The Model 161 sof t serve freezer has been carefully
engineered and manufactured to give you dependable
operation.
This unit, when properly operated and cared for, will
produce a consis tent quality product. Like all
mechanical products , it will require cleaning and
maintenance. A minimum amount of care and
attention is necessary if the operat ing procedures
outlined in this manual are followed closely.
This Operator’s Manual should be r ead before
operating or performing any maintenance on your
equipment.
The Model 161 will NOT eventually compensate and
correct for any errors during the set-up or filling
operations. Thus , the initial assembly and priming
procedures are of extrem e importance. It is str ongly
recommended that personnel responsible for the
equipment’s operation, both assembly and
disassembly, go through these proc edures together in
order to be properly trained and to make sure that no
misunderstandings exist.
In the event you should require technical assistance,
please contact your local authorized Taylor Distributor.
If the crossed out wheeled bin symbol is
affixed to this product, it signifies that this product is
compliant with the EU Directive as well as other similar
legislation in effect after A ugust 13, 2005. Therefore,
it must be collected separately after its use is
completed, and cannot be disposed as unsorted
municipal waste.
The user is responsible for returning the product to the
appropriatecollection facility, as specified byyour local
code.
For additional infor mation regarding applicable local
laws, please contact the municipal facilit y and/or local
distributor.
Compressor W arranty Disclaimer
The refriger ation compressor(s) on this machine are
warranted for the term indicated on the warrant y card
accompanying this machine. However , due to the
Montreal Protocol and the U.S. Clean Air Act
Amendment s of 1990, many new refrigerants are
being tested and developed, thus seeking their way
into the service industry. Some of these new
refrigerants are being advertis ed as drop-in
replacement s for numerous applic ations. It s hould be
noted that, in the event of ordinary service to this
machine’s refrigeration system, only the refrigerant
specified on theaffixed data label should beused.
The unauthorized use of alternate refr igerants will void
your compressor warranty. It will be the owner’ s
responsibilit ytomake this fact knowntoany technician
he employs.
It should also be noted that Taylor does not warrantthe
refrigerant used in its equipment . For example, if the
refrigerant is lost during the course of ordinary service
to this machine, Taylor has no obligation to either
supply or provide its replacement either at billable or
unbillable terms. Taylor does have the obligation to
recommend a suitable replacement if the original
refrigerant is banned, obsoleted, orno longer available
during the f ive year warranty of the compressor.
The Taylor Company will continue to monitor the
industry and test new alternates as they are being
developed. Should a new alternate prove, thr ough our
testing, that it would be accepted as a drop-in
replacement , then the above disclaimer would
become null and void. To find out the current s tatus of
an alternate refrigerant as it relat es to your
compressor warranty, call the local Taylor Distribut or
or the Taylor Fac tory. Be prepared to provide the
Model/Serial Number of the unit in question.