Filter
Top Products
21
Model 161 Troubleshooting Guide
Section 8 Troubleshooting Guide
PROBLEM PROBABLE CAUSE REMEDY PAGE
REF.
1. No pr oduct being
dispensed.
a. The power swit ch is in the
OFF posit ion.
a. Place the power switch in
the AUTO pos ition.
14
b. The mix level i s
inadequate in the mix
hopper.
b. Fill the mix hopper with
mix.
15
c. The beater motor
overloaded.
c. Reset the freezer.
10
d. Th e unit is unplugged at
the wall rec eptacle.
d. Plug in the power c ord.
Press the push-button
switch.
10
e. The circuit breaker is
tripped or the fuse is
blown.
e. Place the circuit breaker in
the “ON” position, or
replace the fuse. Press
the push-button s witch.
10
f. The freezer door is
incorrectly assembled.
f. See “Operating
Procedures” for proper
installati on.
12
g. Pr oduct is being drawn off
in ex cess of t he fr eezer’s
capacity.
g. Stop drawing product and
allow the unit to recover.
---
2. The machine will not
operate in the AUTO
mode.
a. Th e unit is unplugged. a. Plug in the power c ord;
press the push-button
switch.
10
b. The refrigeration system is
not activated.
b. Momentarily raise the
draw switch to activate the
refrigeration system.
16
c. The circuit breaker is
tripped, or the fuse is
blown.
c. Place the circuit breaker in
the ON pos ition, or
replace the fuse. Press
the push-button s witch.
10
d. Th e beater motor
overloaded, causing a loss
of power t o the power
switch.
d. Reset the freezer.
10
3. The product is t oo stiff. a. Th e control is set too cold. a. Contact service
technician.
10