Filter
Top Products
13
Model 161 Operating Procedures
Step 8
Lubricatethe inside of the freezer doorspouts from the
bottom. Insert the draw valves into the freezer door
fromthebottom until theslot in the drawvalvescomes
into view.
Figure 11
Step 9
Slide the o-ring onto eac h pivot pin and lubricate.
Figure 12
Step 10
Slide the tip of the drawhandle into the slot of the draw
valve, starting fr om t he right . S lide the short pivot pin
through the far right draw handle. Slide the long pivot
pin through t he far left and middle draw handles.
Figure 13
Step 11
Snap the design caps over the bott om of the fr eezer
door spouts.
Figure 14
Step 12
Lay the air tubes in the bottom of the m ix hoppers .