Taylor 161 Freezer User Manual


 
23
Model 161 Troubleshooting Guide
PROBLEM PROBABLE CAUSE REMEDY PAGE
REF.
9. The unit goes out on
overload excessively.
a. There are too many
appliances plugged into
the circuit.
a. A separate 20A c ircuit is
needed for t he freezer to
operate properly.
---
b. An extension cord has
been plac ed between the
power cord and the wall
receptac le.
b. If th e extension cord i s
used, it must match the
power cord in size of
circuit ampacit y.
---
10. M ix from one freezing
cylinder bleeds over to the
second cylinder.
a. Th e center draw valve
seal is worn, or is
improperly lubricated.
a. Lubric ate properly and
replace seal ev ery 3
months.
12 / 24