Villaware FPVLJESLO1 Juicer User Manual


  Open as PDF
of 82
 
9
maintenance
•Somepartsmightstainwhenincontactwithcertainfruitsandvegetables.Inorderto
avoidthis,allpartsshouldbewashedimmediatelyaftereachuse.
problems and solutions
PROBLEM SOLUTION
Juice Extractor will not work
afterswitchingon.
•Lid/Covermightnotbelockedintoposition.
•Turnoffandunplugunitthenensureallpartsare
assembledproperly.
•Turnoffandunplugunitthencheckifthereareany
residuesblockingtheunit.
Motormakesloudnoiseandunit
startsvibrating.
•Turnoffandunplugunitthenensureallpartsare
assembledproperly.
•Juicingoverripefruitsmayproducetoomuchpulp
andclogthelter.Turnoffandunplugunitthen
cleanthelterthoroughly.
Motorappearstostallwhile
juicing.
•Ifpulpstartsbuildingupunderthelid,slowdown
thejuicingprocess.Turnoffandunplugunitthen
cleanthelterbasket,stainlesssteellterandlid.
Too much pulp builds up on
stainlesssteellter.
•Followtheinstructionstodisassemble
theunitincludedinthe “AfterUsingYour
JuiceExtractor”section.Cleanoutthepulp
fromthelter.
Pulp is too wet with less juice
extraction.
•Tryreducingthespeedorslowingthejuicingaction.
Remove stainless steel mesh filter and thoroughly
cleanmeshwiththenylonbrush.Rinsethelter
basketwithhotwater.Ifthenemeshholesare
blocked, soak the basket in a solution of hot water
with
1
0% lemon juice to unblock the holes or
washinthedishwasher.Thiswillremoveexcess
brebuildup(fromfruitsorvegetables),
which could
bereducingtheowofjuice.
Juice leaks between the rim of
theJuicerandCover
•Tryreducingthespeedorslowingthejuicingaction
bypushingtheFoodPusherdownslower.
Motorstopsaftercontinued
heavyuse.
•Themotorcontainsaresettable
fuse to protect
againstoverheating.
Turn the juice extractor off
“
”andunplugitfromtheelectricaloutlet.
After the juice extractor has cooled, plug the juice
extractor into the electrical outlet and resume
normaluse.
 previous next