Filter
Top Products
8. Slide a new charcoal filter into place.
The filter should rest at the angle shown.
9. Slide the bottom of the vent cover into
place. Push the top until it snaps into
place. Replace the mounting screws.
10. Turn the power back on at the main
power supply.
11. Do not operate the hood without the
filters in place.
Replacing the cooktop and oven lights
Fire Hazard
Use only candelabra-base bulbs,
30-watt maximum.
Turn off power at main power supply
before replacing the light bulb.
Failure to follow the above could result
in fire or electrical shock.
The cooktop light
2. Remove the bulb cover mounting screws.
3. We recommend replacing bulb(s) with
candelabra-base 30-watt bulb(s) available
from your authorized Whirlpool service
company (Part No. 4158432).
4. Turn the power back on at the main
power supply.
1. Turn off power at the main power supply.
64