Filter
Top Products
PROBLEM POSSIBLE CAUSE
SOLUTION
You do not hear
The command is not correct. Re-enter command.
the Programming
Tone
The fan seems to The oven has been stored in a
The fan will run slower until the oven warm
be running
cold area. up to normal room temperature.
slower than usual
The microwave
Probe is not inserted far enough Make sure probe is at least l/3 way into
oven turns
off
too
into food. food.
soon or not soon
enough when
Probe is not positioned in food Place tip of probe in center of food.
using the Tern
correctly.
perature Probe
Probe is touching bone or fat. Move probe away from bone or fat.
Heat has not had enough time to Allow roasts to stand for a few minutes afts
go through all the food.
cooking.
Probe is loose in socket. Plug probe tightly into its socket.
Cook Power is not set correctly. Re-enter Cook Power.
Probe temperature is not set
Re-enter probe temperature.
correctly.
Model with gas
Your microwave oven is designed You can restart microwave oven once the
lower oven only:
to shut down if used while lower
internal temperature has reached an
The microwave
oven surface burners are on at acceptable level. If microwave oven still
oven shuts down
high settings for an extended does not work after a reasonable time, call
while in opera-
period of time.
a service technician to check for a broken
tion. Display
or blocked cooling fan.
goes blank.
33