Filter
Top Products
97-0019-01-01 73
Troubleshooting
To view a fault list:
1. On the Select Device menu, highlight System and press Enter.
2. On the System Settings menu, highlight View Fault List.
3. Press Enter.
Detected Warning Types
There are two types of detected warnings: automatic and manual.
When the Freedom SW detects a warning condition, it displays a
warning message on the SCP.
Table 2 describes how they differ in their behavior and in how you
can respond to them when they appear on the SCP.
To view a warning list:
1. On the Select Device menu, highlight System and press Enter.
2. On the System Settings menu, highlight View Warning List.
3. Press Enter.
Escalating automatic
faults
Clears automatically if the detected fault
condition goes away, just like an automatic
fault.
However, if an escalating automatic fault
occurs several times within a defined time
period, the escalating automatic fault becomes a
manual fault, requiring user intervention. For
example, if three detected faults occur in one
minute, it will no longer clear itself but
becomes a manual fault. Then, you must
identify the problem, correct the condition that
detected the fault, and clear the fault or reset the
device.
Table 1
Detected Fault Types and Behaviors
Fault type Behavior
Table 2
Detected Warning Types and Behavior
Warning type Behavior
Automatic warning Clears automatically if the detected condition
that generated the message goes away. You can
also acknowledge automatic warnings without
waiting for them to clear automatically.
Manual warning Requires you to acknowledge it before you can
proceed with configuring or operating the
Freedom SW. Manual warnings are usually in
the form of a Yes/No question that you may
acknowledge by pressing the Enter button on
the SCP for Yes and the Func button for No.
Refer to the Xanbus System Control Panel
Owner’s Guide for more information.
Freedom SW 3K2K InvChg Owners Guide.book Page 73 Thursday, July 31, 2014 1:42 PM