Filter
Top Products
20 Freedom SW Owner’s Guide
Operating the Freedom SW with the SCP
Using the Xanbus SCP
As shown in Figure 8, the SCP has these important features:
Display screen System information is shown on the display
screen with an adjustable backlight.
Indicator LEDs Four indicator LEDs on the front panel indicate
the operating status of the Xanbus system.
Push buttons Four push buttons allow you to select device menus
and change or display settings. The red STBY/ON Fault Clear
button toggles the SCP and Xanbus-enabled devices between
Operating mode and Standby (Power Save) mode, if held down for
more than five seconds. The button can also be used to clear any
active faults or warnings by momentarily depressing the button.
System Control Panel
The Xanbus System Control Panel (SCP) provides configuration
and monitoring capability for all Xanbus-enabled devices on the
network. All changes to the configuration of the Freedom SW are
made with the SCP.
The front panel of the Freedom SW provides limited control,
including reset; charger enable and disable; and inverter enable and
disable.
Enabling a function When a function is enabled, it is allowed to
occur but other conditions may have to be met before the function
actually works. For example, the charger function on the Freedom
SW may be enabled, but will not charge the battery unless qualified
AC power is present.
Disabling a function When a function is disabled, it is not
allowed to occur and if it is already occurring, it is terminated
immediately. Regardless of other conditions, the function will not
work. For example, even if AC power is present, if the charger
function is disabled, the Freedom SW will not charge the battery.
NOTE: All functions on the front panel can also be controlled from
the SCP.
Freedom SW 3K2K InvChg Owners Guide.book Page 20 Thursday, July 31, 2014 1:42 PM