Filter
Top Products
What’s New at Revision 8.2.0? 17
2 Set the cr/lf option by entering either of these commands:
set crlf
OR
toggle crlf
Press Enter to redisplay the prompt. Your response should now be
accepted.
STP linkState Changes
The
linkState of a port is now a factor in determining the Spanning Tree
port state. This change helps prevent bridge loops when making network
connections to previously inactive ports.
The
bridge port summary and the bridge port detail screens
include a new
linkState column.
To display the bridge information:
1 From the top level of the Administration Console, enter:
bridge port summary
OR
bridge port detail
The system prompts you for slot number(s).
2 Enter the number(s) of the slot(s) or
all to view port parameters for all
bridges in the system. The system prompts you for the port type.
3 Enter
Ethernet.
The system prompts you for port number(s).
4 Enter the number(s) of the port(s) or
all to view port parameters for
all ports on the bridge.
Sample screen showing the display after the changes:
Top-Level Menu
system
ethernet
fddi
tokenring
➧bridge
ip
snmp
analyzer
script
logout
display
mode
lowLatency
ipFragmentation
ipxSnapTranslation
trFddiMode
addressThreshold
agingTime
stpState
stpPriority
stpMaxAge
stpHelloTime
stpForwardDelay
stpGroupAddress
srBridgeNumber
➧port
packetFilter
➧summary
➧detail
multicastLimit
stpState
stpCost
stpPriority
srRingNumber
srHopLimit
address
port rxFrames rxDiscards txFrames
FDDI 1 0 0 0
Fast Ethernet 1 0 0 0
Ethernet 2 59243130 0 866810375
... ... ... ...
port portId fwdTransitions
FDDI 1 0x8001 0