Filter
Top Products
18 COREBUILDER 6000 INTELLIGENT SWITCHING SOFTWARE REVISION 8.2.0
Note these additional items:
■ The linkState up or down applies to Ethernet and Fast Ethernet ports, not
FDDI ports, and only when the
stpState for the bridge is enabled. If the
stpState on the Bridge menu is disabled, the State for the port
remains in forwarding state.
■ When the bridge port is in the Removed state, the State remains in
forwarding state.
■ If STP is disabled on an individual port, the State remains disabled.
Table 1 describes the port states and how they relate to the linkState. This
table is valid only when the stpState for the bridge is enabled.
*The Port State is either blocking or forwarding. The final state depends on the Spanning Tree
configuration of the network.
CoreBuilder 6000 12-Slot Chassis
The CoreBuilder 6000 12-slot chassis is the latest generation of the
CoreBuilder 6000 chassis. This chassis and the 8.2.0 software release allow
you to remove and replace the power supplies and fan trays in case of
failure.
Fast Ethernet 1 0x8002 0
Ethernet 2 0x8003 0
... ... ...
port stp linkState state
FDDI 1 enabled n/a forwarding
Fast Ethernet 1 enabled down disabled
Ethernet 2 enabled up forwarding
Table 1 Port States When stpState Is Enabled
If STP is and linkState is Then Port State is
enabled up
blocking or forwarding*
enabled down disabled
disabled up disabled
disabled down disabled
removed up forwarding
removed down forwarding