Filter
Top Products
Updating Your System Software
7
# tar xvf /dev/rfd0
11
Remove diskette #5 using the following command:
# eject
The following files should be in your /usr/lp6000 directory:
■
README1
■
lp600000
■
lp600001
■
lp600002
■
lp600003
■
lp600004
■ restore_lpx
12 Use this script to decompress and restore the split file (lp600000,
lp600001, lp600002, lp600003, and lp600004):
This procedure creates the uncompressed file . See the
README1 file for file
size and checksum information.
Copying to the MS-DOS Platform
The CoreBuilder software for an MS-DOS system is distributed on four
diskettes. This software must be installed using either the Windows 95 or
the Windows NT operating system.
3Com recommends that you exit from all Windows programs before
running this Setup program.
Installing on a Windows 95 or Windows NT Computer. To copy
software to an MS-DOS host computer’s hard disk using Windows 95 or
Windows NT, take these steps:
1 Insert diskette #1 into a disk drive. These instructions assume drive a.
2 For Windows 95, click the Windows 95 START button and choose the Run
command.
OR
For Windows NT, choose Run from the File menu.
The system displays the Setup screen, with the system software name, and
the Setup dialog box.