Filter
Top Products
Avaya™ ATM WAN Survivable Processor Manager Installation and Configuration 19
4VITEVMRK7IVZIVWERH;74WJSV%741EREKIV
4. Verify that the WSP configuration matches the main PPN configuration.
Refer to Figure 3-11 in ATM Installation, Upgrades, and Administration Using
MultiVantage Solutions., 555-233-124, Issue 4.
5. Administer the WSPs on the main server.
Refer to “Administration” on page 3-42 in ATM Installation, Upgrades, and
Administration Using MultiVantage Solutions., 555-233-124, Issue 4.
6. Install the C-LAN circuit pack.
Refer to “Installing and Administering a C-LAN Circuit Pack” on page 3-49 in ATM
Installation, Upgrades, and Administration Using MultiVantage™ Solutions, 555-233-124,
Issue 4. In addition:
a. Make sure that the C-LAN circuit pack that ASP Manager uses to connect to the
PPN is in cabinet 01, preferably in the 01C or 01D carrier.
b. Do not put the C-LAN circuit pack in the B carrier on any of the WSPs.
c. Make sure the node names of the C-LAN circuit packs are the same for all of the
C-LAN circuit packs on both the PPN and all WSPs. Use the change node-names
ip command.
d. Do not attempt to enter the node names of the WSPs’ C-LAN circuit packs in the
Node Names screen of the PPN. (It is not possible, even if you perform Step c,
above.)
7. Test C-LAN connectivity to the LAN.
Refer to “Testing the external connection to the LAN” on page 3-54 in ATM
Installation, Upgrades, and Administration Using MultiVantage Solutions, 555-233-124,
Issue 4. In addition:
a. Make sure you have C-LAN SAT access to the PPN and each WSP.
b. The PC that will be running the ASP Manager server should also be able to access
each of these C-LAN circuit packs.
c. If necessary, for troubleshooting purposes, you can install a copy of Avaya Site
Administration on the PC that will be running the ASP Manager server.
8. If you want to use Access Security Gateway (ASG), have Avaya enable it on your
servers and/or WSPs. (page 20)
9. Have Avaya turn on the
System Management Data Transfer Only? customer option
on each server and WSP that you plan to use with ASP Manager. (page 21)
10. On each main server and WSP, create a login that ASP Manager can use to upload or
download translations, or use existing logins that have these permissions. If you create
new logins for this purpose, have Avaya enable them. (page 21)