Filter
Top Products
-RWXEPPMRK%741EREKIV
30 Avaya™ ATM WAN Survivable Processor Manager Installation and Configuration
6. Click the plus sign icon next to ATM WAN Survivable Processor Manager.
The installation program displays the ASP Manager client and server options.
7. Put a check mark by the ASP Manager components you want to install and click Next.
— Client: This can be installed on one or more computers. It is installed on the server
computer automatically when you install the server software.
— Server: This must be installed on a single computer only.
If you plan to install both client and server, click server. This installs both.
8. Verify the information in the “Check Setup Information” screen and click Next.
Click Back to correct any information, and click Next when you are ready to install
the selected applications. The installation program copies the necessary files to your
hard drive.
9. Read the license agreement and if you accept the terms and conditions, click Yes.
10. Specify the computer on which to install the ASP Manager server software.
You can type the computer name or the fully-qualified domain name (FQDN). The
FQDN is the host name followed by the IP domain name. For example:
dnapc1.department.company.com.
If you do not know the IP address, you can find it as follows: choose
Start>Settings>Control Panel, double-click Network, click the Protocols tab,
select TCP/IP, click the Properties button, and then click the IP address tab.
* Note: Note the information you enter here; you will need it when you install the client.
11. Specify the number of the port through which the ASP Manager server software will
communicate with the ASP Manager clients and other devices, and click Next.
ASP Manager installs the appropriate software.
12. If you selected Client in Step 7, enter the computer name or FQDN, and the port
number, of the ASP Manager server computer.
You recorded this information when you installed the ASP Manager server software.
13. Restart the computer by selecting “Yes, I want to restart my computer now.”
When the computer restarts, the ASP Manager server software will start
automatically. When the client is first started, it displays the first screen that must be
completed to configure ASP Manager. See “Specifying the Main Server” on page 34.
14. Click OK.
You can now install the ASP Manager client on other computers in your network,
using the same process.