Filter
Top Products
'VIEXMRKXLI%HQMRMWXVEXMZI0SKMR
24 Avaya™ ATM WAN Survivable Processor Manager Installation and Configuration
-J]SYRIIHXSGVIEXIXLMWPSKMR
To create the administrative login, you must have permissions in the MultiVantage software
to add and change logins.
1. Access the MultiVantage System Administration screens.
2. At the command line, enter add login <name>
Where <name> is the word you want to use as the login. If your location uses DNA, do
not reuse DNA logins for this purpose.
3. Enter your password.
4. Verify that the
Login Type: field is set to customer.
5. Verify that the
Service Level: field is set to super-user.
6. In the
Login’s password: field, enter the password that you want to associate with
the administrative login.
7. In the
Reenter Login’s password: field, enter the password again.
8. If you want this login to use ASG, then in the
Access Security Gateway? field, enter
a y and complete the fields on page 2 of the form.
If you do not see this field, your server does not have the ASG feature enabled. To
enable it, see ‘‘ Enabling ASG on Your Main Servers’’ on page 20.
Field Description
Blocked Enter y to temporarily disable the login ID from accessing
the server through ASG.
System
Generated
Secret Key?
To use ASG, either you or the MultiVantage software on
this server must generate a Secret Key, which you must
enter on the server and in ASP Manager when you are
configuring it. Enter a y to have the MultiVantage software
on this server generate the Secret Key.