Filter
Top Products
Cooking with Convotherm by Cleveland
57
18. Exit the Tray Timer function with the Smart Key , or Start/Stop key .
19. When the set time on a Tray Timer has elapsed, the Signal Tone will sound.
20. Take appropriate action (check food, load, unload, stir, etc.)
21. Note that the cooking program DOES NOT STOP and the Tray Timers CONTINUE TO
COUNT DOWN after a Signal Tone sounds, and the Start/Stop key is pressed and / or
the oven door is opened.
22. Press the Start/Stop key or open the door.
23. Use steps 6-18 to reset an individual Tray Timer to 0:00. The countdown and Signal Tone for that
Tray Timer will stop and make that Tray Timer available for use, if desired.
24. Individual Tray Timers may be added or adjusted as needed without affecting the other Tray Timers by
using steps 6-18 without changing the time to 0:00.
Pre-Heating
The Pre-Heating function heats the oven to the desired temperature before loading food, and helps
ensure consistency and quality.
1. Press the Smart Key
.
2. Various options will appear in the display.
3. Use the Selector Dial
6019002_00
D
to select Pre-Heat
.
4. Confirm by pressing the Smart Key
.
5. Select “Yes” with the Selector Dial
6019002_00
D
.
6. Confirm “Yes” with the Smart Key
.
7. Press the Temperature key
and set the pre-heating temperature.
8. Press the Time key
and set the pre-heating time.
9. The display will show the Pre-Heat icon
.
10. The pre-heat program will start.
Recommendations:
• PRE-HEAT countertop models for 10-15 minutes and floor models for 30 minutes at 10-20%
HIGHER
than the cooking temperature.
• Pre-heat floor models with the pre-heat bridge or the trolley in place.
Reduced Fan Speed
Reduced fan speed helps reduce the speed of moving air inside the oven. Use the reduced fan speed for
products sensitive to air currents such as soufflés, meringues, sponges, cream puffs and puff pastry.
1. Press the Smart Key
.
2. Various options will appear in the display.
3. Use the Selector Dial
6019002_00
D
to select Reduced Fan Speed .
4. Confirm by pressing the Smart Key
.
5. Select “Yes” with the Selector Dial
6019002_00
D
.
6. Confirm “Yes” with the Smart Key
.
7. The Reduced Fan Speed icon
appears and the display shows the nominal settings for the
selected mode, cooking plan or recipe.
8. Press the Smart Key
.
9. The Combi will start with reduced fan speed.
NOTE: When the program ends, the Combi will reset the Reduced Fan Speed to OFF.