Cuisinart SMO-56C Blender User Manual


 
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic safety precautions should always
be followed, including the following:
1. READ ALL INSTRUCTIONS BEFORE USING.
2. To protect against the risk of electrical shock, do not put motor base of
blender in water or other liquid.
3. Close supervision is necessary when any appliance is used by or near
children.
4. Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning or removing contents from blender jar.
Never put hands into the blender jar, or insert fingers into dispenser
tap hole, or handle the blades with appliance plugged in.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged cord or plug or after
the appliance malfunctions, or is dropped or damaged in any manner.
Return appliance to nearest Cuisinart service facility for examination,
repair, and/or mechanical or electrical adjustment.
7. The use of attachments, including canning or ordinary jars, not
recommended or sold by Cuisinart may cause fire, electrical shock,
or risk of injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of counter or table or touch hot
surfaces.
10. Keep hands and utensils out of jar while blending, to reduce the risk
of severe injury to persons or damage to blender itself. A rubber or
plastic spatula may be used but must be used only when the blender is
turned OFF.
11. When blender is in ON mode, and LED lights are flashing or
glowing, do not touch cutting assembly, interfere with blade
movement, or remove blender jar cover. Accidentally touching a speed
button may activate the blender.
12. BLADES ARE SHARP. HANDLE CAREFULLY.
13. To reduce the risk of injury, never place cutting assembly on base
unless the blender jar is properly attached.
14. Always operate blender with the cover in place.
15. Never leave your blender unattended while running.
16. When blending HOT liquids, remove measured pour lid (centre piece of
cover) to allow steam to escape.
17. Twist on locking ring firmly. Injury can result if moving blades
accidentally become exposed.
18. Do not use an extension cord with this unit. Doing so may result in
fire, electrical shock, or personal injury. Regarding your cord set:
A longer cord has been provided so that you will have flexibility in
positioning your Cuisinart
®
Premium 2 in 1 Blender near an electrical
outlet. Exercise care when using the longer cord, to avoid entangling
or tripping over the cord. The longer cord should be arranged so that
it will not drape over the counter or tabletop, where it can be pulled on
by children or tripped over. Excess cord should be stored in the cord
storage area at the back of the blender base to avoid injury caused by
the longer cord.
19. Wash the blender jar, locking ring with cutting assembly, dispenser tap,
dispenser plug and cover before first use.
20. WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK OR FIRE,
DO NOT REMOVE THE BASE PANEL. NO USER SERVICEABLE PARTS
ARE INSIDE. REPAIR SHOULD BE DONE ONLY BY AUTHORIZED
PERSONNEL.
21. Always operate the blender with the dispenser tap or dispenser plug in
place.
22. WARNING: FLASHING LIGHT INDICATES READY TO OPERATE. DO
NOT TOUCH BLADES.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
NOTICE:
This appliance has a polarized plug (one prong is wider than the other).
To reduce the risk of electric shock, this plug will fit into a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Do not
modify the plug in any way.
1