Filter
Top Products
3
FEATURES AND BENEFITS
1. 2-oz. (60 ml) Measured Pour
Lid Allows you to measure and
add ingredients without
removing the cover.
2. Cover Easy press-on cover with
tightfitting seal resists leakage.
3. 56-oz. (1.7 L) Glass Jar with
Handle Large capacity is great
for any size crowd.
4. Blending Stick (not shown)
Helps move ingredients when
preparing a thick mixture.
5. High-quality Cutting Assembly
with Patented Stainless Steel
Blades (not shown) Strong
enough for all blending tasks,
including ice crushing.
6. Removable Dispenser Tap
Allows you to dispense drinks
with ease.
7. Dispenser Tap Plug (not shown)
When dispensing is not desired,
you can remove the dispenser
tap and replace it with the plug.
This allows you to use your
blender for standard blender
tasks.
8. Push-button Controls
a. High and Low Buttons: Choose
High or Low speed to blend the
ingredients to the desired consistency. Red LED lights will indicate
which speed you are using.
b. Pulse Button: Allows you to pulse at High to Low speeds, so you
canblend ingredients only as much as needed.
9. Heavy-duty Motor Base It is so sturdy and stable, it will not “walk” on
your counter.
10. Slip-proof Feet Prevent movement during use and damaging marks on
counter tops or tables.
11. Cord Storage (not shown) Keeps countertops safe and neat,
conveniently storing excess cord.
USE AND CARE
ASSEMBLY
To use your Premium 2 in 1 Blender, begin by assembling the blender jar.
1. Turn the blender jar (a) upside down, and place it flat on a sturdy
surface.
2. Position the rubber gasket (b) on the round opening on the bottom of
the blender jar.
3. Turn the locking ring with cutting assembly (c) upside down, and place
the blade end in the blender jar
opening. Engage threads by twisting
the locking ring clockwise until
tightened. Make sure locking ring is
tightly fastened to blender jar. Once
assembled, turn the blender jar
right-side up.
NOTE: Blades are sharp... handle
carefully
4. Push the cover onto the top of the blender jar. Twist the measured pour
lid into the cover, or place the blending stick into the cover.
5. Place the blender jar on the motor base so that the handle is
positioned to the back of the blender.
6. Screw the dispenser tap or dispenser plug onto the front of the locking
ring.
7. Plug in power cord. Your blender is now ready to be used.
HELPFUL REMINDERS
• Once the cover is in position, additional ingredients can be added
during blending by simply lifting the measured pour lid, adding
ingredients, and replacing the measured pour lid.
• Cover should always be in place while the unit is on.
• WARNING: Do not place blender jar onto base while motor is running.
• Do not twist locking ring from blender jar when removing blender jar
from base. Simply lift blender jar from motor base.
• Boiling liquid or solid frozen foods (with the exception of ice cubes or
½ inch [1.3 cm] pieces of frozen fruit) should never be placed in the
blender jar.
Note: Blades are sharp...
handle carefully
(c)
(b)
(a)
1.
2.
3.
6.
8b.
8a.
9.
10.