Filter
Top Products
Removing and Installing Parts 83
Installing a Hard Drive
1
Unpack the replacement hard drive, and prepare it for installation.
2
Check the documentation for the drive to verify that it is configured for your computer.
NOTE: If your replacement hard drive does not have the hard drive bracket attached, remove the
bracket from the old drive by unsnapping it from the drive. Snap the bracket onto the new drive.
3
Gently slide the drive into place until you feel a click or feel the drive securely installed.
4
Connect the power and hard-drive cables to the drive.
drive
hard drive bracket
serial ATA
data cable
power cable