Filter
Top Products
39
V1.10
.
8.9.5. Alarm Action – Alarm Recording
【Step1.】 Select “Recording” in “Alarm Action”
field.
【Step2.】 Select “Breach Device”, and enter
“Remark”
8.9.6. Alarm Action – Email
【Step1.】 Select “Email” in “Alarm Action”
field.
【Step2.】 Select “Breach Device”, and enter
“Remark”
Select camera form “Breach Device” field and enter a brief
description in “Remark” field to describe this alarm. Email will
attached with two snapshot image files if you select camera
other than ”text only”
【Step3.】 Enter Email Address
8.9.7. Alarm Action – Others ( Model dependent)
【Step1.】 Select “Preset” in “Alarm Action”
field.
Select Preset Point edited in C8.5 from “Preset” field, please
refer to C8.9.2.for the remaining steps. When alarm is detected,
the system will turn PT camera to the specified preset location.
【Step2.】 Select Alarm Action by “DO ON” /”DO
OFF”
Select “DO ON” /”DO OFF” from “Alarm action” field to turn on or
off relay device when alarm detected, please refer to C8.9.3. for
the remaining steps. When alarm is detected, the system will
turn off/on DO accordingly.