Filter
Top Products
40
V1.10
8.9.8. 【Examples】
1. Set alarm triggered by Cam01-image and records the video of Cam01-image:
Select Cam01-image icon in System setup Area and click Alarm button from Menu bar, then select “Alarm action” by Recording and “Breach
Device” by “Cam01-image”.
2. Set alarm triggered by Cam01-sensor and records the video of Cam02-image:
Select Cam01-sensor icon in System setup Area and click Alarm button from Menu bar, then select “Alarm action” by Recording and “Breach
Device” by “Cam02-image”.
3. Set alarm triggered by Cam01-sensor and send snapshot of the video of Cam02-image:
Select Cam01-sensor icon in System setup Area and click Sensor Alarm button from Menu bar, then select “Alarm action” by Email, “Breach
Device” by “Cam02-image”.
8.10. Placing Device to eMap
【Step1.】 Placing Device to eMap
Drag-and-drop the device icon from System Setup area to its
location on the eMap interface. All devices under camera
(including image, relay, and sensor) can be placed on the
eMap interface.
【Step2.】 Rotate the Image icon on “ eMap
interface”
Right click the Image icon in eMap interface, you will find 8
directions to select to indicate what direction that camera is
facing.
【Note】All devices could be deleted by (1) click Remove
button in the Menu Bar (2) right click icon in the eMap
interface to find “Delete” function.