Filter
Top Products
55
V1.10
13. What’s the purpose of keep DB while installation?
D-Link D-ViewCam can reserve DB while upgrade software from v1.00 to v1.10, so that all the
data and configuration will be kept in new version.
14. What’s the purpose of backup DB?
D-Link D-ViewCam provides DB automatically backup function, so that you can restore DB if
the DB is corrupted due to computer crashing.
15. What’s the purpose of Save Setting and Load Setting?
D-Link D-ViewCam provides Save Setting and Load Setting to give you the flexibility to remove
device and add device in one step, so that you don’t need to reconfigure all the device setting
as described in User Manual section C8.
D-Link D-ViewCam Operation
16. Do I need a very powerful computer to run D-Link D-ViewCam?
To monitor and control 1 to 4 cameras and record their video, your PC must be equipped with
at least Windows 2000 or XP, a Pentium 4 2.8GHz CPU, 512MB of memory and 40GB hard disk
space. If you installed 5 to 9 cameras, you need at least 60GB hard disk. For a large
surveillance site with 10 to 16 cameras, at last a Pentium 4 3.0GHz CPU, 1GB RAM and 80GB
hard disk space are required.
17. What about firewalls? Do they affect D-Link D-ViewCam?
If you use D-Link D-ViewCam on computers with Windows XP SP2 or applications with
personal firewalls, please configure the firewall after you installed D-Link D-ViewCam. Most of
the personal firewall from antivirus service will automatically remind you to permit D-ViewCam
program.
18. What about firewalls of Windows XP Service Pack 2?
Windows XP Service Pack 2 has a built-in firewall function; Windows XP will ask whether you
want to unlock some services while you install D-ViewCam. Please follow the below steps.