Filter
Top Products
58
V1.10
insecure, you need to turn off Internet Security or disable Personal Firewall first in order to
save image configure/ image quality of DCS-900 Bx and DCS-G900, and turn on Internet
Security or enable Personal Firewall again to secure your system.
21. What should I do when there is no video display for the camera that I just added to
the network?
Please check to see if you correctly typed in (1) the model name of the camera, (2) the IP
address of the camera, (3) the port number of the camera, and (4) camera user name and
password? Also, check to see if the network cable is connected properly.
22. Why doesn’t my computer screen display any video from a connected camera?
One of the following might be the cause of this problem: (1) your camera user name and
password are incorrect, (2) the network is unstable, (3) the work load is too heavy for your
computer to handle.
23. What are the different ways to record video?
D-Link D-ViewCam provides 3 methods to record: (1) manual recording (capture of video feed
at the moment you command the system to), (2) schedule recording (automatic recording
according to the time periods that you set), and (3) alarm recording (automatic recording
according to the alarm settings).
24. How does alarm detected recording work?
You can add alarm detection to automatic recording so that only events that are detected by a
set alarm will be recorded. This will save you disk space and the time it takes to search for
relevant recorded events.
25. When an alarm occurs, how do I know which camera it is related to?
When an alarm occurs, an area eMap will be highlighted. This area is where the alarm comes
from. Note that the eMap only displays the latest occurred alarm (We presume that you have
used the Admin Program to place all camera icons on the eMap). To see the details of all
alarms, please look at the Alarm Notification Log in Monitor Program. For easy identification,
when you click on an item in the alarm log, the camera that is associated to that alarm will be
highlighted on the eMap.
26. How do I get alarm notifications?
D-Link D-ViewCam sends alarm messages in different ways, based on the alarm-triggered
action that is set for a camera. For example, if the alarm-triggered action is Email, the message
will be sent by Email. For details, please refer to User’s Manual section C 8.9.