Filter
Top Products
Preparation
To refill the wash container:
1. Separate the dispense line quick-connector in the cap of the
Wash Container.
2. Unscrew the cap of the Wash Container and lay it and the Pick-
Up Filter on a clean paper towel.
3. Fill the Wash Container with the wash fluid that is being used.
Note: If the wash solution is being changed,
discard the contents of the Wash Container
and thoroughly clean it before filling it with the
new wash solution.
4. Place the Pick-Up Filter into the Wash Container and screw the
cap on. Re-connect the dispense line quick-connector.
64 Opsys MW™ User’s Guide