Filter
Top Products
Returning a Washer for Service
Returning a Washer for Service
If the instrument must be returned for service, it must be cleaned and
decontaminated if it has been in contact with potentially infectious body
fluids (including human blood), pathological samples, or toxic or radioactive
materials.
Note: Refer to page 69 for cleaning and
decontamination instructions.
To return a Washer for service:
1. Contact the nearest
DYNEX Technologies
technical service facility
for return authorization.
2. Clean and decontaminate the Washer.
3. Fill out an Equipment in Transit form (Figure 10)
4. Pack the Washer and the Equipment in Transit form for
shipment.
5. After you receive a return authorization, ship the Washer to the
nearest
DYNEX Technologies
facility (see page 85).
Opsys MW™ User’s Guide 83