Filter
Top Products
Cleaning and Decontamination
Cleaning and Decontamination
The Opsys MW™ is constructed from materials that resist chemical attack.
Spills should be cleaned as soon as possible. If you need to decontaminate
the Opsys MW™ instrument (for example, before servicing the instrument),
clean the system and then decontaminate it as described below.
CAUTION: Always disconnect the power cable
before cleaning the instrument.
To clean the system:
1. Clean external surfaces with a cloth moistened with mild
laboratory detergent.
Note: If needed, dilute the laboratory
detergent according to the manufacturer’s
instructions before using.
To decontaminate the system:
1. Wipe the surfaces with a cloth moistened with 10% bleach or
70% alcohol.
Opsys MW™ User’s Guide 69