Filter
Top Products
4-20
4.10.4.4 Refilling the Vat from Bulk Oil Systems after Disposal
The computer displays fill pot from bulk.
The bulk oil refill pump uses a momentary switch. It only pumps when the switch is depressed.
1. Press and hold the 9 (1 yes) button to refill the vat until the oil
reaches the fill line (see Figure 76).
2. With the vat full, release the 9 (1 yes) button.
Figure 76 Figure 77
3. Press the 8 (2) button, when the vat is full, to close the fill valve (see Figure 77).
The computer displays off.
4.11 Filter Menu
The filter menu selections are used for filtering, draining, filling and disposing.
4.11.1 Accessing the Filter Menu
1. Press and hold the filter button for the selected vat for three seconds (see
Figure 78).
Figure 78
Computer displays filter menu for three seconds, changing to Auto Filter.
2. Press the t and u buttons (see Figure 79) to scroll between:
a. auto filter See pg. 5-2
b. maint filter See pg. 5-8
c. dispose See pg. 4-16
d. drain to pan See pg. 4-21
e. fill pot from DRAIN pan See pg. 4-22
f. fill pot from bulk See pg. 4-22
Figure 79
The first two menu items: AUTO FILTER and MANTAINENCE (MANUAL) FILTER are covered
in Chapter 5. The other menu items are covered on the following pages.
The DRAIN TO PAN and FILL POT FROM DRAIN PAN functions are used primarily for
diagnostic purposes. They are used when oil is to be drained to the pan or returned to the frypot.