Filter
Top Products
4-28
DANGER
Allow oil to cool to 100°F (38°C) before draining into an appropriate METAL container
for disposal.
DANGER
When draining oil into an appropriate MSDU or METAL container, make sure the
container will hold at least FOUR gallons (15 liters) or more. Otherwise oil could
overflow and can cause injury.
The drain valve opens and the oil is drained into the MSDU for JIB systems or the filter pan for bulk
system. The computer displays disposing.
Bulk or JIB System: The drain valve remains open and the computer displays Vat empty,
alternating with yes no.
8. With the vat empty, press the (1 yes) button (see Figure 124).
Figure 124
The computer displays oil discarded, alternating with yes no.
9. JIB system: Press the (1 yes) button (see Figure 125). Discarded oil is
in MSDU. Skip to step 17.
Bulk system: Press the (2 no) button (see Figure 126). Discarded oil is
in the filter pan.
Referred from Step 6: Press the (1 yes) button. Skip to 17.
Figure 125
Figure 126
Bulk System: The computer displays engage dispose
switch*.
10. Bulk System: Switch the bulk oil system switch to dispose (see
Figure 127).
* If the bulk oil system waste tank is full, the computer displays RTI
TANK FULL. Call the bulk oil waste provider.
Figure 127
11. Bulk System: Press the (1) button (see Figure 128).
Figure 128
The computer displays PAN TO WASTE. The pump transfers the waste oil from the pan to the
bulk oil waste tanks.
The computer displays PAN empty.
12. Bulk System: Pull the filter pan out and ensure the filter pan is empty.
13. Bulk System: Press the (2) button (see Figure 129) to run the pump again
if the pan has oil remaining. The computer will display PAN TO
WASTE.
Figure 129