Filter
Top Products
5-5
5.4.2 Change Filter Pad Prompt
The computer displays CHANGE FILTER PAD alternating with
yes no.
1. Change the filter pad and ensure the filter pan has been pulled
forward, out of the cabinet, for at least TWO minutes. DO NOT
PRESS the 9 (1 yes) button before TWO minutes have elapsed.
2. Press the 9 (1 yes) button (see Figure 10)
Figure 10
The computer returns to the regular cook mode.
The computer restarts the change filter pad sequence in 15 minutes if the pan was not
pulled from the cabinet for two minutes.
Pressing 8 (2 NO) (See Figure 11), restarts a 15- minute timer ending
with the CHANGE FILTER PAD alternating with yes no
prompt with both the JIB and Filter lights flashing. This cycle will
repeat until the filter pan is pulled forward, out of the cabinet, for at least
TWO minutes and then pressing the 9 (1 yes) button. DO NOT
PRESS the 9 (1 yes) button before TWO minutes have elapsed.
Pressing the 9 (1 yes) and or 8 (2 NO) button before TWO minutes
have elapsed, starts the 15-minute timer cycle to repeat again.
Figure 11
5.4.3 Second Filter Error in a Row
The computer displays FILTER ERROR for ten seconds then displays SERVICE
REQUIRED. The fryer is disabled. Call your FASC to repair and reset the computer.