Filter
Top Products
5-3
If YES is chosen, SKIM VAT is displayed for ten seconds changing to cnfm fltr. Skim
the crumbs from the oil with a front to back motion, removing as many crumbs as possible from
each vat. This is critical to optimizing usable oil life and quality in the oil.
Note: If NO is chosen in response to either FLTR now or Cnfm FLTR, filtering is
cancelled and the fryer resumes normal operation. The FLTR now prompt is
displayed once the FLTR AFTR count is satisfied. This sequence repeats until yes is
chosen.
If the filter pan is not fully engaged, the computer displays CHK PAN. Once the filter pan is
pushed fully into place, press the 9 (1) button to continue.
When 9 (1) YES is chosen, the fryer displays filtering and the auto filtration cycle is
started.
Note: Simultaneous filtering of multiple vats does not occur.
Once filtering is complete the computer display changes to low temp until the fryer reaches
setpoint.
Once fryer reaches setpoint and the computer display changes to the product or dashed lines, the
fryer is ready for use.
The complete filtering process takes roughly three minutes.
DANGER
Keep all items out of drains. Closing actuators may cause damage or injury.