Filter
Top Products
15
Before first use
Here you find out what you have to do before
preparing meals with your appliance for the first time.
Read the section entitled Important safety notes
beforehand.
The appliance must be completely fitted and
connected.
The "First settings" menu appears in the display after
the mains has been connected. You can now set your
new appliance:
▯ Language
▯ Time format
▯ Time
▯ Date format
▯ Date
▯ Temperature format
▯ Water hardness
Notes
‒ The "First settings" menu only appears the first
time the appliance is switched on after
connection to the mains or if the appliance had no
power supply for several days.
After connection to the power, the GAGGENAU
logo first appears for about 30 seconds, after
which the "First settings" menu appears
automatically.
‒ You can change the settings at any time (see the
section entitled Factory setting).
Setting the language
The default language appears in the display.
1 Select the desired display language with the
rotary selector.
2 Confirm with ™.
Note: When the language is changed, the system is
restarted; this procedure takes a few seconds.
Setting the time format
the two possible formats 24h and AM/PM appear in
the display. The default format is 24h.
1 Set the required format with the rotary selector.
2 Confirm with ™.
Setting the time
The time appears in the display.
1 Set the required time with the rotary selector.
2 Confirm with ™.
Setting the date format
The three possible formats D.M.Y, D/M/Y and M/D/Y
appear in the display. The D.M.Y is the default.
1 Set the required format with the rotary selector.
2 Confirm with ™.
'HXWVFK
6SUDFKH
7LPHIRUPDW
7LPH
'DWHIRUPDW