Gaggenau BS 474/475 610 Convection Oven User Manual


 
21
Timer functions
In the timer menu, set:
Š Timer
p Stopwatch
6 Cooking time (not in the idle state)
5 Cooking time end (not in the idle state)
Launching the timer menu
You can launch the timer menu from any mode. Only
from the factory settings, program selection is set to
S, the time menu is not available.
Touch the M symbol.
The timer menu appears.
Timer
The timer runs independently of the other appliance
functions. You can enter a maximum of 90 minutes.
Setting the timer
1 Call up the Timer menu.
The "Timer" function Š is displayed.
2 Turn the rotary selector to set the desired time.
3 Start with I.
The Timer menu closes and the timer starts to run.
The symbol for the timer Š appears on the display and
the time can be seen counting down.
A signal sounds once the time has elapsed. The
audible signal ceases if you touch the symbol.
You can exit the Timer menu at any time by touching
the ' symbol. This way, the settings are lost.
Suspend timer:
Call up the Timer menu. Select the "Timer" function
with C, select Š, and touch the H symbol. To let the
timer run on, touch the I symbol.
Switch off the timer early:
Call up the Timer menu. Select the "Timer" function
with C, select Š, and touch the Ž symbol.
Stopwatch
The stopwatch runs independently of the other
appliance functions.
The stopwatch counts up from 0 seconds to 90
minutes.
It has a pause function. Therefore, you can stop the
timer in between times.
Starting the stopwatch
1 Launch the timer menu.
2 With C, select the "Stopwatch" function p.
3 Start with I.
7LPHU


6WRSZDWFK
