Filter
Top Products
26
Personal recipes
You can save up to 50 individual recipes. You can
record a recipe. You can assign these recipes a name
so that you can fall back on them quickly and
conveniently if you need them.
Recording a recipe
You can set up to five phases in succession and you
can record them.
1 Set the program selection to the required heating
function.
The i symbol is displayed.
2 Touch the i symbol.
3 Choose a free storage location with the rotary
selector.
4 Touch the g symbol.
5 Set the desired temperature with the rotary
selector.
6 The cooking time is recorded.
7 Recording another phase:
Set the program selection to the required heating
function. Set the required temperature with the
rotary selector. A new phase begins.
8 Once the appliance has achieved the desired
cooking result, touch the & symbol to end the
recipe.
9 Enter the name under "ABC" (see Section entitled
Entering names).
Notes
‒ Recording a phase does not begin until the
appliance has reached the set temperature.
‒ Every phase must last at least one minute.
‒ During the first minute you can change the
heating function or the temperature.
Enter the core temperature for a phase:
Insert the core temperature probe in the socket in the
oven interior. Set the heating function and
temperature. Touch the
+ symbol. With the rotary
selector, enter the required temperature and confirm it
with +.
Programming a recipe
You have the option of programming and saving up to
five phases of preparation.
1 Set the program selection to the required heating
function. Set the required temperature with the
rotary selector.
The
i symbol is displayed.
2 Touch the i symbol.
3 Choose a free storage location with the rotary
selector..
4 Touch the % symbol.
5 Enter the name under "ABC" (see Section entitled
Entering names).
6 Choose the first phase with the C symbol.
The heating function and temperature set at the
start are displayed. You can change the heating
function and temperature with the rotary
selectors.
7 Choose the time setting with the C symbol.
8 Set the required cooking time with the rotary
selector.
9 Choose the next phase with the C symbol.
- or -
Preparation is complete, end input.
10 Save with ™.
- or -
Cancel with ' and quit the menu.
Enter the core temperature for a phase:
Choose the next phase with the C symbol. Set the
heating function and temperature. Touch the +
symbol. With the rotary selector, enter the required
temperature and confirm it with +.
Note: For phases for which a core temerature has
been programmed you cannot set a cook time.
)
)