Gaggenau BS 474/475 610 Convection Oven User Manual


 
25
Yom Tov mode
With this function, the appliance is programmed to
perform in three stages.
Stage 1 and 2 can be programmed for a maximum total
duration of 74 hours. The duration of Step 3 is 1 hour
and cannot be modified.
Stage 1: maintains a warm temperature of 122° F
(50°C) in the convection heating function. The interior
oven lights remain off through this stage.
Stage 2: the appliance raises to a desired temperature
setting and maintains a temperature between 120 and
450° F (50 -230°C). For warming and cooking foods
in the convection heating function. The desired time
can be adjusted for this stage. The interior oven lights
will be on during this time.
Stage 3: maintains a warm temperature of 122° F
(50°C) in the convection heating function for 1 hour
after stage 2 has ended. The interior oven lights will
be on during this time.
Note that easily perishable foodstuffs must not be left
in the oven for too long.
Setting the Yom Tov mode
1 Set the program selector to
ž .
2 Touch the / symbol.
The suggested value of 24h at 185° F (85°C)
appears in the display.
To set Stage 2 cooking time with rotary selector:
1 Touch the $ symbol to adjust the duration of
Stage 2 cooking time 6 .
2 Set the desired Stage 2 cooking time with the
rotary selector.
3 Touch the C symbol to adjust the end of Stage 2
cooking time 5 .
4 Select the end time with the rotary selector.
5 Change the date if needed by touching the C
symbol to V .
6 Rotate the selector to the desired date.
7 Confirm settings by touching the symbol.
To set Stage 2 temperature:
1 Rotate selector to desired Stage 2 temperature.
2 Start with I .
The temperatures of Stage 1 and Stage 2 appear in
the display. The remaining time to the beginning of
Stage 2 is counted down in the display. The Yom Tov
screen will appear as shown.
The program will begin with the pre-set warm
temperature without light, then advance to the
programmed temperature with light until the end of
the set date and time, and then maintain the pre-set
warm temperature for 60 minutes.
The appliance no longer heats after expiry of the time.
The display is blank. Set the program selector to 0.
Switching off:
To cancel the operation, set the program selector to 0.
6DEEDWKPRGH
)

)



)
Æ