Filter
Top Products
16
Setting the date
The default date appears in the display. The day
setting is already active.
1 Set the required day with the rotary selector.
2 Switch to the month setting with the C symbol.
3 Set the month with the rotary selector.
4 Switch to the year setting with the C symbol.
5 Set the year with the rotary selector.
6 Confirm with ™.
Setting the temperature format
The two possible formats °C and °F appear in the
display. The °C format is selected by default.
1 Set the required format with the rotary selector.
2 Confirm with ™.
Setting the water filter
"Water filter” appears in the display. The default is
"Available".
It is recommended to install the descaling system
GF 111 100 if the water hardness exceeds 7°dH
(carbonate hardness 5°dH).
1 Use the rotary selector to select "Available" (with
water filter) or "Not available" (without water
filter).
2 Confirm with ™.
3 If water filter "Available" has been selected:
"Water filter capacity” is shown in the display.
4 Turn the rotary selector to select the capacity of
the filter cartridge (between 100 - 9000 liters).
Refer to the instructions included with the filter
cartridge.
5 Confirm with ™.
Setting water hardness
"Water hardness" appears in the display.
1 Check the mains water with the included
carbonate hardness test: fill the small
measurement tube with mains water up to the 5 ml
mark.
2 Add drops of indicator solution until the color
changes from purple to yellow.
Important: count the drops and carefully swing
the measurement tube after every drop until the
liquids have mixed thoroughly. The number of
drops corresponds to the water hardness.
3 Set the measured water hardness with the rotary
selector. The value 12 is set by default.
4 Confirm with ™.
Completing initial set-up
"Initial set-up complete. Please calibrate the appliance
before first cooking" appears in the display.
'DWH
7HPSHUDWXUHIRUPDW
:DWHUILOWHU
$YDLODEOH
:DWHUKDUGQHVV