Filter
Top Products
31
Child lock
The appliance has a child lock to make sure children
cannot operate it inadvertently.
Notes
‒ You must set the child lock in the factory setting
to "Available" (see section entitled Factory
setting
).
‒ If there is a power cut while the child lock is
activated, it may be deactivated when the power
returns.
Activating the child lock
Requirement:
Program selector is set to 0.
Touch the 0 symbol for at least 6 seconds.
The child lock is activated. The standby screen
appears. The 0 appears at the top of the display.
Deactivating the child lock
Requirement:
Program selector is set to 0.
Touch the 1 symbol for at least 6 seconds.
The child lock is deactivated. You can switch on the
appliance in the usual manner.