Gaggenau BS 474/475 610 Convection Oven User Manual


 
32
Factory setting
In the factory settings, you can adapt your appliance
individually.
1 Set the program selector to
S.
2 Select "Factory setting" with the rotary selector.
3 Touch the symbol.
4 Set the required factory setting with the rotary
selector.
5 Touch the % symbol.
6 Set the factory setting with the rotary selector.
7 Save with or cancel with ' and quit the
current factory setting.
8 Turn the program selector to 0 to quit the factory
setting menu.
Changes are saved.
Basic setting Possible settings Explanation
Brightness Stages 1, 2, 3, 4, 5*, 6, 7, 8 Setting display brightness
Standby screen On*/Off
- Clock
- Clock + GAGGENAU logo*
- Date
- Date + GAGGENAU logo
- Clock + date
- Clock + date + GAGGENAU logo
Appearance of the standby screen.
Off: no display. Use this setting to reduce
the standby consumption of your appliance.
On: several displays can be set, confirm
"On" with and choose the desired dis-
play with the rotary selector.
The selection is displayed.
Display screen Minimized*/Standard When Minimized is set, only the most
important details are displayed after a short
time.
Touchpad color Gray*/White Select the color of symbols on the touch-
pads
Touchpad tone Tone 1*/Tone 2/Off Select the signal tone when touching a
touchpad
Touchpad volume Levels 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the touchpad tone
Preheating signal On*/Off The signal tone sounds when the required
temperature is reached during preheating.
Signal volume Levels 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the signal tone
Water filter Available* / not available Available: use appliance with water filter.
Not available: use appliance without water
filter.
Water filter capacity 100 - 9000 liters Set the water filter capacity
Water hardness 1-18 Check mains water with the included car-
bon hardness test. Set the measured water
hardness.
Calibration Calibrating the appliance Setting the boiling point