Filter
Top Products
www.GEAppliances.com
ii ill!iili llllllllllllll
Arcing between metal
surfaces in oven while
speedcookingor
defrosting
Possible Causes
hnproper spacing hetween
metaJ surfaces m_d/or
a]mnh_mn foil.
What ToDo
• See Usingthe TrivectionTM Ovensection.
Display shows Wiring from house to oven • Coutnct installer or qualified electrician to check house
"Miswired detected" is incorrect, wiring to oven,
Option not seen on the Option may be listed • Select MOREto see additional items.
displayscreen on the next screen.
Hot air from oyen When using the cooking • This is normal.
features, hot air will exit
the oven through the vent
located above the door.
Fooddoes not bake or Oven controls improperly set. • See the Usingtraditionalbakeand roastsection,
roastproperlyin the Shelf position is incorrect • See the Usingtraditional bake and roast section,
oven
or the shelf is not level.
Incorrect cookware or • See the Using traditional bake and roast section,
cookware of hnproper
size being used.
Oven temperature needs • See the Adjust theoven temperature Do it yourself[
adjustment, se(-ti_)u,
Food does not broil Oven controls improperly set. • Make sure _ m select BROIL
properly
hnproper shelf position • See the Broiling Guide.
being used.
Cookware not suited • Use the broiling pan and grid that came with your oven,
for broiling.
Aluminum foil used on the • See the Using traditional bakeand roast secdon,
broiling pan madgrid has
not been fitted properly mid
slit as recommended.
In some areas the power • Preheat the broil element fi_r 10 minutes,
(voltage) may be low. • Broil for the lon_rest_, period of time recolnmeuded in
the Broiling Guide.
Clock and timer The clock is in the • See the Settings secdou tbr the oven dock,
do not work or no clock mode.
display goes blank
Controls improperly set. • See the Using the clock and lower oven timer secfi_>n,
A fuse ha your home may be • Replace the tt/se or reset the circuit breakel:
hlown or the circuit breaker
tripped,
41