Filter
Top Products
59
3 Operation
3.3 Initial Start-up
3.3.1 Unpacking
• Remove shipping materials.
• Check that items supplied are complete and match delivery note.
3.3.2 Transportation
The dispensing station has two carrying handles (L) at the sides – see Section 3.2.
Requires a minimum of two persons to carry.
Suitable for transportation by pallet trucks.
3.3.3 Installation
• Install in a suitable location. Provide:
– Power supply, socket.
– Compressed air supply.
• Position docking station for meter-mix dispense gun (optional).
• Plug connecting cable of dispense gun docking station (U) to connector (W)
(on the rear of the dispensing station) (optional).
• For start-up please refer to Section 3.3.4.
Do not switch the dispensing station on. Material damage can result
by running the system without product being pumped through it!