Filter
Top Products
66
3 Operation
3.6 Factory Settings
Factory settings of the Dual Rotor Pump Dispenser are as follows:
Menu item Setting
Operator menu
Continuous mode On
Volume behaviour 1.00 : 1
Adaptation 100 %
Max. pump efficiency (range max.) 100 %
Dispense time 0.1 sec.
Service menu
Retract time 0.3 sec.
Automatic mixer flushing every 10 min
Flush time 0.1 sec.
Calibration factor 100 %
Interface language English
3.7 Operator menu settings
The electronic pump control system allows settings for all parameters required for
operation. The operator menu allows the following settings:
Menu Page
3.7.1 Volume Ratio 66
3.7.2 Product specific adaptation of the dispensing system 68
3.7.3 Maximum pump capacity 69
3.7.4 Operating mode (continuous or timed mode) 69
3.7.5 Dispense time 70
Refer to Section 4.1 for the Operator menu flow chart.