Filter
Top Products
Fig. 41
7. KA7E only:
Fig. 42
A. Loosen hose clamp and remove hose from
control side nozzle and pipe assembly.
B. Remove screws and nuts securing control
side nozzle pipe assembly to top of oven.
NOTE: Check condition of o-rings on screw heads
and replace if necessary.
Fig. 43
C. Work pipe out of oven.
Fig. 44
8. Insert two large screwdrivers or similar objects
that can lift fan motor assembly enough for motor
shafts to clear inside ceiling.
Fig. 45
9. Identify and disconnect motor wires.
10. Carefully slide fan motor assembly out of cavity.
11. Remove screws securing fan motor assembly
and lift out.
KA SERIES ELECTRIC ROTARY OVENS - REMOVAL AND REPLACEMENT OF PARTS
F25294 Rev. A (0412) Page 16 of 72